Draft a project report, example and guidlines are provided below. I will also attach my MIPS code for project part A and B that this is based off of. Files for the completed project codes a

Draft a project report, example and guidlines are provided below. I will also attach my MIPS code for project part A and B that this is based off of. Files for the completed project codes are provided below using MARS 4.5. I just need to report fully completed. Must be familiar with C-language and be able to translate MIPS code to C-language. Also include a flowchart MIPS code. Need proof AI was not used and a passing plagarism report. Here is the grading rubric: Project Report Submission Guidelines 1.0 Description of Project Report Elements Provide a professionally-prepared report with text in the body of the document in “Times New Roman” 11-point font with all of the elements identified below. Description of Cover sheet: Provide a full page which lists the Project title, student name, email address, course name, due date, and date of final submission. Project Description: Provide project name, narrative description of at least 4 sentences, inputs, outputs. Program Design: Provide a narrative description in sentences of how your code operates, and include a flowchart with sufficient explanation about the program design for someone else familiar with MIPS to be able replicate your design. Symbol Table: Provide a 2-column Table of all Registers used for both Part A and Part B,and their Purposes, where each is listed on a separate row and identified by register name $t0, $s0, etc., as well as any Labels used and their purpose on separate rows. Learning Coverage: provide a meaningful list of at least 5 technical topics learned from this project in full complete sentences. Prototype in C-language: Prototype code written in C-language that matches the structure of the submitted assembly code which is fully operational is required for both Parts A and B, e.g. using a C-compiler or free C-compiler available at http://codepad.org For this project, a validated output run of the C code is not required to be submitted. However, fully-operational C-code should be pasted into the report satisfying the Grading Rubric listed below to receive full credit (not screenshots). Test Plan of .asm Code: Define the testing procedure and inputs used to assure proper functionality of the MIPS code for both Parts A and Bwhich must be sufficiently detailed for a new user to follow explained as sentences. Provide a screenshot illustrating at least three test cases being successfully conducted. 2.0 Grading Rubric Project Report submission: 100 points total as follows:  Professional preparation: [5 points total] as follows: i.e. Typed document with text of the paragraphs in Times New Roman 11 pt font, clear and grammatically well-formed explanations, cover sheet provided, page numbering and document heading numbering (1.0, 2.0, 3.0, etc to identify the required sections listed below). [5 points]  Report Content: [95 points total] as follows having the following numbered section headings: 1.0 Project Description: project name, narrative description of at least 4 sentences, including identification of program inputs and outputs for both Parts A and B. [10 point] 2.0 Program Design: narrative description of how your code operates, and a flowchart with sufficient explanation about the program design for someone else familiar with MIPS to be able replicate your design for both Parts A and B[10 points for detailed narrative and 10 points for high quality flowchart] 3.0 Symbol Table: a 2-column Table describing all Registers used and their specific Purpose in the code for both Parts A and B, where each register is listed on a separate row and identified by register name $t0, $s0, etc., as well as any Labels used and their purpose on separate rows for both Parts A and B. [10 points for register table and 10 points for label table] 4.0 Learning Coverage: provide a meaningful list of at least 5 technical topics in complete sentences learned from this project that you could mention in a job interview. [20 points] 5.0 Prototype in C-language: paste the C-code in the report (do not paste a screenshot of the C-code) for both Parts A and B as you do not need to submit a .c file and do not need to provide a screenshot of the C-language output for this project. However, the .c code shall be a viable fully working prototype for all parts to receive credit. [10 points] 6.0 Test Plan: provide details in sentences identifying the inputs chosen to test the program and why these were selected, and justification why they provide adequate test coverage for both Parts A and B. [6 points] 7.0 Test Results: provide screen shot(s) of at least 3 proper MIPS code executions in MARS for your Test Plan inputs for both Parts A and B. [6 points] 8.0 References: provide a list of all reference materials you used in the project. [3 point] Project Report Sample: