As the business analyst in the CIO’s department of Maryland Technology Consulting (MTC), your next task in developing your Business Analysis and System Recommendation (BA&SR) Report is to develop

Stage 3:   Requirements

Before you begin work on this assignment, be sure you have read the Case Study and reviewed the feedback received on your Stage 1 and 2 assignments. 

Overview

As the business analyst in the CIO’s department of Maryland Technology Consulting (MTC), your next task in developing your Business Analysis and System Recommendation (BA&SR) Report is to develop a set of requirements for the hiring system. 

 

Assignment – BA&SR Section III. Requirements

 

The first step is to review any feedback from previous stages to help improve the effectiveness of your overall report and then add the new section to your report.  Only content for Stage 3 will be graded for this submission. Part of the grading criteria for Stage 4 includes evaluating if the document is a very effective and cohesive assemblage of the four sections, is well formatted and flows smoothly from one section to the next.    For this assignment, you will add Section III of the Business Analysis and System Recommendation (BA&SR) Report to your Sections I and II.  In this section you will identify requirements for the new hiring system. This analysis leads into Section IV. System Recommendation of the BA&SR (Stage 4 assignment) that will analyze a proposed IT solution to ensure it meets MTC’s organizational strategy and fulfills its operational needs. 

 

Using the case study, assignment instructions, Content readings, and external research, develop your Section III. Requirements.   The case study tells you that the executives and employees at Maryland Technology Consultants (MTC) have identified a need for an effective and efficient applicant tracking or hiring system.  As you review the case study, use the assignment instructions to take notes to assist in your analysis. In particular, look for information in the interviews to provide stakeholder interests and needs.

 

Use the outline format, headings and tables provided and follow all formatting instructions below. 

III.          Requirements

A.               Stakeholder Interests – Review the interest or objectives for the new hiring system for each stakeholder listed below based on his or her organizational role and case study information.  Consider how the technology will improve how his/her job is done; that is, identify what each of the stakeholders needs the hiring system to do. Then to complete the table below, use information from the stakeholder interviews and identify one significant challenge or problem for each stakeholder related to the current hiring process (not their future expectations).  Then explain how a system could address their problems. Do not define what that position does in the organization.  (Provide an introductory sentence for this section, copy the table below and complete the two columns with 1-2 complete sentences for each role in each column.)

 

Role

Specific
problem related to the current hiring process

How a
technology solution to support the hiring process could address the problem

1.      CEO              

 

 

2.      CFO               

 

 

3.      CIO               

 

 

4.      Director of Human
Resources

 

 

5.      Manager
of Recruiting

 

 

6.      Recruiters

 

 

7.      Administrative
Assistant

 

 

8.      Hiring
Manager (Functional supervisor the new
employee would be working for.)

 

 

 

B.           Defining Requirements – The next step is to identify the essential requirements for the information system. In addition to the stakeholder interests identified above, review the Case Study, especially the interviews, highlighting any statements that tell what the person expects or needs the system to do.  User requirements express specifically what the user needs the system to doThis can be in terms of tasks the users need to perform, data they need to input, what the system might do with that data input, and output required.   System performance requirements express how the system will perform in several performance areas and securityAs a member of the CIO’s organization, you will use your professional knowledge to Identify 5 User Requirements (including one specifically related to reporting) and 5 System Performance Requirements (including 2 security-related requirements).  Refer to Week 5 content on requirements; security requirements are covered in Week 6. Additional research can expand your knowledge of these areas.

 

Once you have identified the 10 requirements, evaluate each one using the criteria below and create 10 well-written requirements statements for the new hiring system. 

 

The requirement statement:

·        Is a complete sentence, with a subject (system) and predicate (intended result, action or condition).

·        Identifies only one requirement; does not include the words “and,” “also,” “with,” and “or.”

·        For User Requirements, states what tasks the system will support or perform.

·        For System Performance Requirements, states how the system will perform.

·        Includes a measure or metric that can be used to determine whether the requirement is met (time or quantity), where appropriate.

·        Is stated in positive terms and uses “must” (not “shall,” “may” or “should”); “the system must xxxx” not “the system must not xxx”.

·        Avoids the use of terms that cannot be defined and measured, such as “approximately,” “robust,” “user friendly,” etc.

·        Is achievable and realistic; avoids terms such as “100% uptime,” or “no failures”.

 

For a full requirements document, there will be many requirement statements; you only need to provide the number of requirements identified for each category.  Do not provide generic statements but relate to the needs of MTC to improve its hiring process.

 

(Provide an introductory sentence, copy the table, and complete the Requirements Statement and Stakeholder columns.   No additional information should be entered into the first column, Requirement ID.) 

 

 

 

 

Requirement   ID# only

 

Requirement Statement

Stakeholder

(Position and Name from Case Study that
identified this requirement)

 

User Requirements – (What the user needs the system to do)

 

EXAMPLE

The
system must store all information from the candidate’s application/resume in
a central applicant database.
EXAMPLE PROVIDED – (Retain text but remove this label and gray
shading in your report)

Recruiter
– Peter O’Neil

1.

 

 

2.

 

 

3.

 

 

4.

 

 

5.

(Reporting-Output of organized information retrieved
from the system—replace this statement with a specific reporting requirement)

 

 

System Performance Requirements – (How the system will perform)

 

EXAMPLE

The
system must be implemented as a Software as a Service solution.
EXAMPLE PROVIDED –
(Retain text but remove this label and gray shading in your report)

CIO – Raj Patel

6.

 

 

7.

 

 

8.

 

 

9.

(Security-replace
this with a specific security requirement)

 

10.

(Security-replace
this with a specific security requirement)

 

 

Formatting Your Assignment

Consider your audience – you are writing in the role of an MTC business analyst and your audience is MTC and your boss, the CIO.  Don’t discuss MTC as if the reader has no knowledge of the organization.  Use third person consistently throughout the report.  In third person, the writer avoids the pronouns I, we, my, and ours. The third person is used to make the writing more objective by taking the individual, the “self,” out of the writing. This method is very helpful for effective business writing, a form in which facts, not opinion, drive the tone of the text. Writing in the third person allows the writer to come across as unbiased and thus more informed.

 

·        In Stage 3, you are preparing the third part of a 4-stage report.  Use the structure, headings, and outline format provided here for your report.   Use the numbering/lettering in the assignment instructions as shown below.

III.          Requirements

A.     Stakeholder Interests

B.     Defining Requirements

 

·        Begin with Sections I and II, considering any feedback received, and add to it Section III.

·        Write a short concise paper:  Use the recommendations provided in each area for length of response.  It’s important to value quality over quantity.  Section III should not exceed 3 pages.

·        Content areas should be double spaced; table entries should be single-spaced.

·        To copy a table:  Move your cursor to the table, then click on the small box that appears at the upper left corner of the table to highlight the table; right click and COPY the table; put the cursor in your paper where you want the table and right click and PASTE the table.

·        Ensure that each of the tables is preceded by an introductory sentence that explains what is contained in the table, so the reader understands why the table has been included.

·        Continue to use the title page created in Stage 1 that includes:  The title of report, company name, your name, Course and Section Number, and date of this submission.

·        Use at least two resources with APA formatted citation and reference for this Stage 3 assignment.  Use at least one external reference and one from the course content. Course content should be from the class reading content, not the assignment instructions or case study itself.  For information on APA format, refer to Content>Course Resources>Writing Resources.

·        Add the references required for this assignment to the Reference Page.  Additional research in the next stage will be added to this as you build the report.  The final document should contain all references from all stages appropriately formatted and alphabetized.

·        Running headers are not required for this report.

·        Compare your work to the Grading Rubric below to be sure you have met content and quality criteria. 

·        Submit your paper as a Word document, or a document that can be read in Word.  Keep tables in Word format – do not paste in graphics.

·        Your submission should include your last name first in the filename:  Lastname_firstname_Stage_3

GRADING RUBRIC:

 

 

Criteria

 

 

Far Above Standards

 

 

Above Standards

 

 

Meets Standards

 

 

Below Standards

 

 

Well Below Standards

 

Possible Points

Stakeholder
Interests

Identification
of specific stakeholder problems (interests and objectives for improving the
hiring process) and how a technology system could address. 

Generally,
0-3 points per role. Both quantity
and quality evaluated.

38.4 Points

35.2-38.4 Points

Problems and how a technology solution will
address are correctly and clearly described and fully explained using a
sophisticated level of writing.

32.64 points

32-33.6 Points

Problems and how a technology solution will
address are clearly described and explained using an effective level of
writing.

28.8 points

 

27.2-30.4 Points

 

Problems and how a technology solution will address are
described and explained.

 

 

 

 

 

23.808 points

22.4-25.6 Points

Problems and how a technology solution will
address are not clearly described and explained; and/or lacks effective
presentation of information

0
points

0-20.8
Points

Content
missing or extremely incomplete, did not reflect the assignment instructions,
showed little or no originality, demonstrated little effort, is not supported
with information from the Case Study; and/or is not original work for this
class section.

38.4

User

Requirements

5
user requirements (1 addresses reporting)

Generally,
0-5 points each.
Both quantity
and quality evaluated.

40 points

36.8-40 Points

Correctly identified, written and sourced;
clearly derived from the Case Study; demonstrates sophisticated analysis.

33.6
points

32-35.2
Point
s

Identified, written and sourced correctly;
requirements are derived from the Case Study; demonstrates effective
analysis.

28.8 points

27.2-31.7 Points

Identified and sourced; requirements are
related to the Case Study.

25.6 points

24-25.6 Points

Fewer than 5 requirements are identified and
sourced; and/or information provided is not correct; and/or requirements are
not all related to the Case Study.

0 points

 

0-22.4 Points

 

Content missing or extremely incomplete, did not reflect the
assignment instructions, showed little or no originality, demonstrated little
effort, is not supported with information from the Case Study; and/or is not
original work for this class section.

40

Performance
Requirements

3
performance requirements and 2 system security requirements

Generally,
0-5 points each
. Both
quantity and quality evaluated.

 

40 points

36.8-40 Points

Correctly identified, written and sourced;
clearly derived from the Case Study; demonstrates sophisticated analysis.

33.6
points

32-35.2
Point
s

Identified, written and sourced correctly;
requirements are derived from the Case Study; demonstrates effective
analysis.

28.8 points

27.2-31.7 Points

Identified and sourced; requirements are
related to the Case Study.

25.6 points

24-25.6 Points

Fewer than 5 requirements are identified and
sourced; and/or information provided is not correct; and/or requirements are
not all related to the Case Study.

0 points

 

0-22.4 Points

Content missing or extremely incomplete, did
not reflect the assignment instructions, showed little or no originality,
demonstrated little effort, is not supported with information from the Case
Study; and/or is not original work for this class section.

40

Research

Two
or more

sources–one source from within the IFSM 300 course content and one external
(other than the course materials)

16 points

14.4-16 Points

Required
resources are incorporated and used effectively. Sources used are relevant
and timely and contribute strongly to the analysis.  References are appropriately incorporated
and cited using APA style.

13.6
points

 

13.6
Points

 

At least two sources are incorporated and are relevant and
somewhat support the analysis. References are appropriately incorporated and
cited using APA style.

 

12 points

 

12 Points

Only
one resource is used and properly incorporated and/or reference(s) lack
correct APA style.

10.4 points

 

10.4 Points

A
source may be used, but is not properly incorporated or used, and/or is not
effective or appropriate; and/or does not follow APA style for references and
citations.

0 points

0-8 Points

No
course content or external research incorporated; or reference listed is not
cited within the text.

16

Format

Uses
outline format provided; includes Title Page and Reference Page

25.6 points

22.4-25.6 Points

Very
well organized and easy to read.  Very
few or no errors in sentence structure, grammar, and spelling; double-spaced,
written in third person and presented in a professional format.

20.736 points

 

19.2-10.8 Points

 

Effective organization; has few errors in sentence structure,
grammar, and spelling; double-spaced, written in third person and presented
in a professional format.

17.664 points

 

17.6 Points

 

Some organization; may have some errors in sentence structure, grammar
and spelling. Report is double spaced and written in third person. 

15.872 points

 

16 Points

 

Not well organized, and/or contains several grammar and/or
spelling errors; and/or is not double-spaced and written in third
person. 

0 points

 

0-14.4 Points

 

Extremely poorly written, has many grammar and/or spelling
errors, or does not convey the information.

25.6

 

 

 

 

 

 

TOTAL
Points Possible

160

 

GET HELP WITH YOUR HOMEWORK PAPERS @ 25% OFF

For faster services, inquiry about  new assignments submission or  follow ups on your assignments please text us/call us on +1 (251) 265-5102

Write My Paper Button

WeCreativez WhatsApp Support
We are here to answer your questions. Ask us anything!
👋 Hi, how can I help?
Scroll to Top