Part 1: Small Business Network Design with Guest Network (40 %) Project Scope A small business network has to be designed for an organization. The organization has occasional guest users (Max 10) visiting the office. There are a total of 50 users in the organization. An FTP server for internal file sharing is required for all the 50 users.

FACULTY OF COMPUTER SCIENCE AND INFORMATION TECHNOLOGY

UNIVERSITI TUN HUSSEIN ONN MALAYSIA (UTHM)

SEMESTER 2 2021/2022

BIC 21303 Computer Networking

Project Specification

PROJECT DUE DATE: WEEK 13 (TUESDAY 21 June 2022)

Part 1: Small Business Network Design with Guest Network (40 %)

Project Scope

A small business network has to be designed for an organization. The organization has occasional guest users (Max 10) visiting the office. There are a total of 50 users in the organization. An FTP server for internal file sharing is required for all the 50 users.

Network requirement.

1.Separate subnet for guest and LAN network.

2.The guest network should be restricted to access only FTP service on the FTP server and all other access to the LAN network should be blocked.

3.IP Network Design

4.Identify the hardware – Switches and Routers.

5.Configuration details on hardware

Tentative Report Contents

1. Project Title

2. Project Scope

3. Network requirement

4. Network planning – list of tasks and assign task to who?

5. IP Network design table

6. Physical Network Design (topology diagram with location/device information)

7. Logical Network Design (topology diagram with IP addresses)

8. Network configuration (Switch and Router interface configuration with explanation). Bonus mark (10m): configure with ACL.

9. Network Testing and verification procedure

10. Bill of material (hardware and software including equipment, model, quantity and estimated cost)

Part 2: A campus network design for a college (60 %)

Project Scope

There are 150 users in the college. 32 users in the Main building, 29 users in Building 1, and 65 users in Building 2. Every building has a lobby which is 220 square feet open space, where wireless access to the network is required. Only authorized personal should have access to the wireless network.

The distance between Building 1 and the main building is 500 meter. The distance between Building 2 and the main building is 90 meter. The distance between Building 1 and Building 2 is 70 meter. A high speed cable internet connection is available in the main building which needs to be shared among the users.

A branch campus is located about 5 km from the main campus network. It also has 100 users, all in the same building. There’s a lobby where wifi access is available. Only registered students can access the wireless network.

A server farm consisting of a web server, email server, DNS server and DHCP server is to be created to support the business needs of the organization.

The necessary equipment and appropriate topology required for the campus network design along with the IP address schema, IP address management, secure wireless access, internet sharing, features and services should be worked out. A bill of material should be included with products from Microsoft, Cisco, D-LINK or Netgear with appropriate quantity which can be used for setting up of the campus infrastructure. Use at least 2 routers.

Tentative Report Contents

1. Project Title and Scope

2. Campus diagram

3. Network requirement analysis (Understanding the hardware and quantity required to setup the network; )

4. Physical Network Design (topology diagram with location/device information)

5. Logical Network Design (topology diagram with IP addresses)

6. IP network design table

7. Network configuration (Switch and Router interface configuration with explanation). Bonus mark (10m): configure with ACL.

8. Network Testing and verification procedure

9. Bill of material (hardware and software including equipment, model, quantity and estimated cost)

Submission Requirements

1. Project Report – Network design for Part 1 and Part 2

2. Recorded Group Presentation (3 to 5 minutes)

Appendix A

Address distribution according to group number. Please choose 1 group.

Address Range	Group #	Group Members
220.10.10.0, 220.10.11.0	1
220.20.20.0, 220.20.21.0	2
220.30.30.0, 220.30.31.0	3
220.40.40.0, 220.40.41.0	4
220.50.50.0, 220.50.51.0	5
220.60.60.0, 220.60.61.0	6
220.70.70.0, 220.70.71.0	7
220.80.80.0, 220.80.81.0	8
220.90.90.0, 220.90.91.0	9
220.100.100.0, 220.100.101.0	10
220.110.110.0, 220.110.111.0	11
220.120.120.0, 220.120.121.0	12
220.130.130.0, 220.130.131.0	13
220.140.140.0, 220.140.141.0	14
220.150.150.0, 220.150.151.0	15