QQI Level 5 5N1794 Safety and Health at Work Assignment Brief 2026 | Chevron College

Posted: February 3, 2026/Under: Uncategorized/By:

QQI Level 5 5N1794 Assignment Brief

Introduction

Welcome to your Safety and Health at Work Assignment Brief.

The following documents contain important information regarding the assignment process, so it is important that you read each part of the document carefully, so you understand what is required of you.

We hope that your completion of this brief will be an enjoyable and informative one in your educational journey and wish you every success in your completion of it. If you have any questions regarding this process, please contact your tutor on rachelsafetymatters@yahoo.com

Assignment Requirements

You are required to complete all sections of the Safety and Health at Work Assignment Brief.

These are detailed below:

Part One

This contains 3 sections which ask you focus on detailing your understanding of Safety and Health in the Workplace, attempting to relate each section to your experience in your own workplace.

Section A: Asks you to demonstrate your understanding of workplace policies and procedures

Section B: Requires you to complete a detailed analysis of the safety statement in your workplace.

Section C: Requires you to conduct a Safety Audit in your workplace.

Ideally the discussions you create while answering the questions should be relevant to your chosen field of study and relevant to your workplace. Your work should show evidence of relevant reading around each topic. Your work must be clearly referenced and include a bibliography.

Part Two

This contains an examination which must be completed. All exam dates are located in the Important Updates section of your Learn Upon dashboard and in the completing your exam section in this module.

call_ to_action1

Safety & Health at Work  5N1794 – Assessment Briefs

Part 1 – Assignment 60%

Word Count 3,000 words (+/- 10 %)

 Part 2- Written Exam 40%

Examination of course note material

Part 1 -Assignment – Learner Brief Assignment  60%

Assessment Activity Description and Instructions to Learner:

You are required to submit a written assignment which details your understanding of health and safety in the Healthcare/Social Care work place and include a health and safety audit.

You should use the following criteria to complete the assignment:

A. Workplace Policies and Procedures (15 marks):

Review the policies and procedures in relation to health and safety that are in the Healthcare workplace, pay particular attention to the following (15 marks):

a. Employers and employee duties in relation to the legislation – Health, Safety and Welfare at Work Act 2005.

b. Emergency planning & reporting procedures – how are the emergency procedures documented, what reporting procedures are in place for accidents and incidents in the Healthcare setting.

c. Policies in relation to safe working environments (Healthcare)

B. Workplace Safety Statement (10 marks)

You should carry out an analysis of your Healthcare workplace safety statement – what are the elements and functions of the safety statement.

C. Safety Audit (18 marks):

You are required to conduct a Safety Audit on your workplace to include the following:

1. List and Classify 3 hazards in the Healthcare work environment – include hazards in relation to work practices, human hazards (alcohol/medication), and housekeeping. (6 marks)

2. Provide a detailed risk assessment conducted in relation to the hazards identified above with recommended actions to minimise or eradicate risks listed. (6 marks)

3. Appropriate control measures recommended in relation to the above hazards, with a view to improving the level of health and safety in the workplace. (6 marks)

Ensure you are using a safety Audit layout that is measurable

D.  Recommendations and Personal Learning  (14 marks):

1. Include 3 recommendations on how to promote safe and healthy work places. (3 marks each)

2. Reflection on your personal learning and development achieved throughout the module. (5 marks)

Marks will also be allocated for the following:

– Demonstrate evidence of critical thinking, additional research and correct referencing (2 Marks)

– Formatting of project and overall layout (1 Marks)

Part 2 – Written Exam – Learner Brief Exam  – 40%

Assessment Activity Description and Instructions to Learner:

 Exam – 40%

Learners are required to complete a written exam for this module.

The exam will take the following structure:

10 Short answer questions – 2 Marks each

2 long questions – 10 Marks each

Learner must answer all questions on the exam.

Exam dates are available on LearnUpon under important information

Please email – ciara@chevrontraining.ie to book an exam

 Marking Guide

All marks are clearly outlined for each part of a question for your information when completing your assignment brief. Please follow the marking guide when planning your answers.
See below for breakdown of grades:
Part One:Written Assignment60%
Part Two:Examination40%

Structuring your Assignment

Examine the marking scheme for each assignment, and use the headings provided in the marking scheme as paragraph headings for your work. By doing this you are far less likely to leave out something that attracts marks and also stops you from focusing too much on one area (One of the most common ways to lose marks).

Things to watch out for 

  • Marks do not carry over from one section to another. No matter how much you write on a given section, you cannot score more than the maximum allowed marks for that section.
  • If you do not use headings in line with those in the marking guide, you are far more likely to leave out something that’s worth marks. Headings also make it easier for the examiner to give you marks, rather than having to hunt through an assignment for mention of the topic.
  • Get somebody else to proofread your work before you submit it. It is much easier to spot mistakes in another person’s writing, and you can lose marks for careless mistakes. Tutors recommend that you send a draft of your assignment for feedback before submitting it in full to ensure you are heading in the right direction.
  • Do not be significantly under or over the required word count (10% above or below is ok).
  • Formatting matters! Use paragraphs and put headings in bold. Only use fonts such as Times New Roman or Arial as they are both professional and clear to read. Change the vertical spacing on your document to 1.5, only use black font colour and use page numbers to make your assignment clearer to navigate.

Checklist of Documents Required

The following documents are required for full submission of your Communications Assignment Brief:
1. Cover Page (Devise your own)
This Cover Page should be the first page of your assignment and include the following information:
a. Name of Student
b. Name of Module
c. Address of Student
d. PPSN
e. Signature of Student (At the End of Document)
2. Written Assignments (Pages 5 to 11)
This will include Part One:
  • Workplace Policies and Procedures
  • Safety Statement
  • Safety Audit
  • Recommendations and Personal Learning
3. Examination (Pages 12-14)
This will include Part Two:
  • 10 short answer questions – (2 Marks each)
  • 2 long questions – (10 Marks each)
4. Authorship Statement (Found in Session ‘Submitting an Assignment- Documents Required- Healthcare’ on Learn-Upon)
Document stating all work submitted is your own and has been referenced accordingly.
5. Learner Record of Hours (Found in Session ‘Submitting an Assignment- Documents Required’ on Learn Upon)
A record of proof of your required work placement hours.
6. Certification Details (Found in Session ‘Submitting an Assignment- Documents Required’ on Learn Upon)
Must be completed only once throughout your course. If completing multiple modules, it is advisable to submit with your first module. This document will require you to provide personal details relevant to your QQI certification.

Submitting your Work

IT IS ESSENTIAL THAT YOU FOLLOW THESE GUIDELINES WHEN YOU ARE SUBMITTING YOUR WORK

Before you submit your work, you must ascertain that all aspects of the assignment brief have been answered. Organize your Documents to ensure you have not missed anything. A list of required documents is included in this booklet (Pages 13-14). Failure to follow this will result in your work not being graded until all aspects of the brief are submitted and could potentially cause a delay in results being issued. Please remember Chevron Policy dictates that Partial Submissions (All parts of Assignment Brief have not been submitted in full) will not be accepted. To ensure you are submitting correctly please upload all documents on the same day.

All written work must be submitted to the Turn-It-In Portal as per Chevron Policy, with no exceptions. A Turn-It-In Tutorial has been provided to you under the session ‘Submitting to Turn It In and Class ID’s’ on your Learn Upon dashboard. Here you will also find the Class ID and Enrolment Key unique to the module you are submitting.

If you have any further questions regarding this, please do not hesitate to contact your tutor by email on healthcaretutor@chevrontraining.ie

Need Expert Help

QQI Level 5 learners often struggle with 5N1794 Safety and Health at Work assignments because exam preparation can feel overwhelming. There is no need to worry, as Ireland Assignment Helper offers professional qqi level 5 assignment help aligned with Chevron College standards. For trust, learners can review our expert-written health and social care assignment samples. Order your 5N1794 Safety and Health at Work assignment today through our assignment help and receive 100% original, well-referenced work written only for you.

The post QQI Level 5 5N1794 Safety and Health at Work Assignment Brief 2026 | Chevron College appeared first on Ireland Assignment Helper.

Recent Comments

No comments to show.