Assignment Task
Introduction
The Health and Safety Executive (HSE) asks you to analyse information obtained from an accredited laboratory of data from workers from four different chemical industries. The HSE wants to know if there is any cause for concern that the workers may potentially be affected by exposure to organic solvents resulting in liver damage. Data for four industries, all of which use a range of potentially hazardous chemicals, has been collected which the HSE hope may shed light on any potential problems.
The problem
Many industrial processes rely on the use of organic chemicals – including volatile solvents. Such compounds are sometimes described as xenobiotics, meaning that they do not exist in nature in any meaningful concentration – their existence is solely the result of human activity. Many of these chemicals, typically chlorinated hydrocarbons, are known to be hazardous, particularly by inhalation. Once in the blood stream they are capable of interfering with enzyme activity as well as interrupting genetic replication processes. Although the use of such chemicals is carefully monitored and regulated the HSE remain concerned about worker exposure. As such the HSE takes the issue seriously and has undertaken a preliminary study via the agency of the accredited laboratory to look into any potential problems and it is the results of this study that you are commissioned to analyse.
The use of LDH as a warning sign
Lactate dehydrogenase (LDH) is an intracellular enzyme. It oxidizes lactate in the presence of NAD+ (oxidised form of nicotinamide adenine dinucleotide) or reduces pyruvate in the presence of NADH (reduced form of NAD). It is used clinically to determine cell damage in a number of organs including heart, liver, muscle and blood. There are 5 iso-enzymes of LDH. Changes in the level of iso-enzyme LDH-5 can be associated with liver function and as such elevated LDH-5 is deemed to be a useful indicator of the initial stages of liver damage that may be caused by exposure to many organic solvents. One method of gauging liver damage is to calculate the ratio of LDH-5 to LDH-1. The higher this value, the greater is the risk that liver damage is taking place. You have been provided with the value of this ratio (LDH-5:LDH-1) for each participant in the study. It is on the basis of the value of this variable that you are being asked to compare the workers’ health.
The study group and the data collected
The HSE in undertaking the study stipulated criteria for workers to take part in the study, namely:
The workers worked exclusively in the specified industries
They worked in areas of actual production (i.e. not in an office or other areas away from the industrial activity)
They had not smoked historically or currently (as self-reported by questionnaire)
They did not historically or currently drink alcohol above the then guideline value of 21/14 (men/women) units/week (as self-reported by questionnaire)
They did not have any known underlying medical condition that could affect the results
From the population satisfying these criteria, a total sub-sample of 125 workers were randomly selected for blood testing, 36 from paint manufacturing, 27 from resin, 31 from dry cleaning and 31 from plasticizer manufacturing.
Your task
You a required to produce a coherent, concise, well presented and well structured report which informs the HSE whether or not there is genuine evidence of difference in the potential health hazard between workers at the different industries – as indicated by the LDH-5:LDH-1 ratio.
Further, you are required to report on whether there is any association between worker length of service in the industry and the potential damage to their health. In concluding the report you cannot assume that the HSE understands statistical methods in detail and you will therefore have to summarise your findings in plain non-technical language. The length of the report should be no longer than words.
You are expected to:
introduce the type of question you are facing including hypothesis testing
produce appropriate descriptive/graphical summaries of the data
justify your choice and undertake the correct statistical tests
interpret any p-values and confidence intervals and correlation co-efficients correctly
arrive at brief and clear conclusions that directly answer the problem
you are free to explore and will be credited for any further analyses of the data you deem worthy of investigation
finally, are the HSE asking exactly the right questions – have potential confounding variables been adequately considered? Is this a well-designed study?
